Accent GL L4-1.6L (2001)
REPROGRAMMING PROCEDURE:
NOTE:
Verify that the vehicle is affected by identifying the vehicle production date and VIN.
AUTOMATIC UPDATE PROCEDURE:
1.
Remove any software cards from the Hi-Scan Pro and insert reprogramming card into the Hi-Scan Pro top slot.
2.
Connect the reprogramming adapter to the Hi-Scan Pro.
3.
Connect the white reprogramming connector (2-pin or 10-pin) to the reprogramming adapter.
NOTE:
Use the correct reprogramming connector.
^
2000-01 Accent produced prior to 3/30/01: White 2-pin reprogramming connector.
^
2001 Accent produced from 3/30/01 and 2002 Accent: White 10-pin reprogramming connector.
4.
Connect power to the Hi-Scan Pro from the cigarette power adapter.
5.
Insert the power cable from the reprogramming adapter into the cigarette power adapter.
6.
Connect the cigarette power adapter into the vehicle cigarette power socket.
7.
2000-01 ACCENT produced prior to 3/30/01: Connect the white 2-pin reprogramming connector to the vehicle black 2-pin TCM reprogramming
connector under the dash. The 2-pin connector is located 6 above the Data Link Connector (DLC).
