Accent GL L4-1.6L (2001)
9.
When the "REPROGRAMMING COMPLETED" message is displayed, the TCM reprogramming process is complete.
10.
Turn the ignition to the OFF position for 20 seconds and then start the engine to check for proper operation.
11.
Check for DTC in the "Engine" and "Automatic Transaxle" menus using the Hi-Scan Pro with SOL card. Erase all DTC.
EXPLANATION OF ERROR MESSAGE:
1.
"INVALID PASSWORD": Please enter the exact password again.
2.
"REPROGRAMMING ERROR, PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry
reprogramming automatically.
3.
"ALREADY REPROGRAMMED" or "INCORRECT TARGET ID": The reprogramming has previously been done on this vehicle or the TCM is
not the type subject to this reprogramming procedure.
4.
"REPROGRAMMING ERROR, PLEASE CHECK THE SYSTEM": In this case, you must reprogram manually after selecting the menu option
"02. LC 1.6D P/R-D [ERROR MODE]".
WARRANTY INFORMATION:
