Accent GL L4-1.6L (2001)
Control Module: All Technical Service Bulletins
A/T - Harsh/Delayed Gear Engagement
Group:
TRANSAXLE
Number:
02-40-010
Date:
03-2002
Model:
Accent 1996-2002
Elantra 1996-2000
Tiburon 1997-2001
Subject:
AUTOMATIC TRANSAXLE HARSH OR DELAYED PARK-REVERSE OR PARK-DRIVE ENGAGEMENT
DESCRIPTION:
If you are servicing a transaxle for harsh or delayed engagement during the Park to Reverse or Park to Drive shift, compare the vehicle with another
vehicle of the same year and model. If the engagement shock or delay is more noticeable than other vehicles, follow the repair procedure shown below:
REPAIR PROCEDURE:
1.
Check the ATF level when the engine is idling in "N" according to TSB 01-40-013. Adjust the ATF level as needed.
2.
Check that idle speed is within specification. If not, inspect the Idle Speed Actuator according to the appropriate shop manual, Fuel System
Section.
3.
Check the engine and transaxle mounting brackets and roll support brackets for broken or deteriorated mounts. If necessary, replace the mounts.
4.
Attach the Hi-Scan Pro and check for Diagnostic Trouble Codes in both the "ENGINE" and "AUTOMATIC TRANSAXLE" menu. If DTCs are
found, repair according to the appropriate TSB or shop manual.
5.
Attach the Hi-Scan Pro and select "HYUNDAI VEHICLE DIAGNOSIS" menu, "AUTOMATIC TRANSAXLE" menu, "CURRENT DATA"
menu and "FLUID TEMPERATURE SENSOR". Confirm the oil temperature sensor operates correctly as shown. If not, replace the oil
temperature sensor.
^
Select: "HYUNDAI VEHICLE DIAGNOSIS" menu.
^
Select: "AUTOMATIC TRANSAXLE" menu.
^
Select: "FLIGHT RECORD".
^
Select: "PCSV-A DUTY" and "PCSV-B DUTY" as shown, then F1 "FIX".
^
Select: F6 "RCD", ENTER and F5 "TRIG".
^
Move the shift selector to "R" or "D", then select F6 "END".
^
Select F1 "GRPH".
A.
HARSH OR DELAYED PARK-REVERSE ENGAGEMENT:
Select "PCSV-A" and "PCSV-B".
NOTE