hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

M/T - Control Shaft Assembly Procedure|Page 7958 > < Shift Cable, M/T|Service and Repair|Page 7953
Page 1
background image

Shift Rail: Technical Service Bulletins
M/T - Control Shaft Assembly Procedure

Group
40 - TRANSAXLE

Number
98-40-011 

Date
10-1998 

Model
Accent 1995-1999

Subject
CONTROL SHAFT ASSEMBLY PROCEDURE MANUAL TRANSAXLE

DESCRIPTION

The purpose of this bulletin is to provide you an assembly procedure for the control shaft on all Accent M5AF3 Manual Transaxle.

The photo shows the individual control shaft components required for the assembly. They are placed in appropriate order for assembly.

PROCEDURE

1.

Insert the rubber boot onto the control shaft.

2.

Insert the control shaft with the boot into the clutch housing hole.

NOTE

Insert the control shaft partially into the clutch housing to allow room for the remaining components to be installed.

M/T - Control Shaft Assembly Procedure|Page 7958 > < Shift Cable, M/T|Service and Repair|Page 7953