Workshop Manuals Factory service & repair Hyundai
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Instrument Panel, Gauges and Warning Indicators16 Lighting and Horns17 Windows and Glass18 Wiper and Washer Systems
Hyundai Accent GSI Coupe L4-1495cc 1.5L DOHC MFI (1998)05 · Powertrain Management
05 · Diagnostics

A/T, Engine Controls - ECM/TCM Reset/Relearn Procedure (Engine Control Module)

Make
Hyundai
Model
Accent GSI Coupe
Engine
L4-1495cc 1.5L DOHC MFI
Year
1998
Section
Sep › 06 › A/T, Engine Controls - ECM/TCM Reset/Relearn Procedure
Powertrain ManagementA/T, Engine Controls - ECM/TCM Reset/Relearn Procedure · page 1 of 3
A/T, Engine Controls - ECM/TCM Reset/Relearn Procedure (Engine Control Module) – Hyundai Accent GSI Coupe L4-1495cc 1.5L DOHC MFI (1998)

Engine Control Module: All Technical Service Bulletins
A/T, Engine Controls - ECM/TCM Reset/Relearn Procedure

AUTOMATIC TRANSAXLE CONTROL MODULE - RESET AND RELEARN ADAPTIVE VALUES

MODEL: All

DESCRIPTION:

The PCM or TCM contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle.
This article provides the procedures necessary to reset (erase) and "relearn" the adaptive values in the PCM/TCM. After the following repairs have been
completed, the PCM/TCM adaptive values must be reset in order to provide optimum shift quality:

^

Replace automatic transaxle

^

Reprogram or swap PCM/TCM from another vehicle

Adaptive values must be reset using procedure # 1 or # 2 according to model and model year (MY) as shown below.

VEHICLES AFFECTED:

^

All

I.

RESET PCM/TCM ADAPTIVE VALUES

HI-SCAN PROCEDURE:

1. Turn the Ignition key to the "ON" position (do not start engine) and move the shift lever to "P."

2. Attach the Hi-Scan Pro to the data link connector (DLC):

^

Select vehicle

^

Select "AUTOMATIC TRANSAXLE" menu.

^

Select "RESETTING ADAPTIVE VALUES,

press "ENTER"

^

Press "ENTFR", then "REST" (F1)

^

Turn Ignition key "OFF" for 10 seconds.

II. RELEARN ADAPTIVE VALUES:

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 1998 Hyundai Accent 1.5L

As an Amazon Associate we earn from qualifying purchases.