Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
6. Remove engine coolant reservoir.
7. Disconnect the brake tubes from the ABS modulator.
8. Remove the modulator mounting bolts and the ABS modulator from modulator mounting bracket.
CAUTION:
1) Never attempt to disassemble the ABS modulator
2) The modulator must be transported and stored in upright position and with sealed ports. The modulator must not be drained.
INSTALLATION
1. Follow the reverse order of removal.
2. Tighten the modulator mounting bolts and brake tube nuts to the specified torque.
Tightening torque:
Modulator mounting bolt: 18 - 22 Nm (180 - 220 kg.cm, 13 - 16 ft. lbs.)
Brake tube nut: 13 - 17 Nm (130 - 170 kg.cm, 9 - 12 ft. lbs.)
3. Bleed the brake system.