Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
2. Measure resistance between the terminal 2 and 3.
Standard value: about 5M Ohms [at 20°C (68°F)]
3. If the resistance is continual, replace the knock sensor.
Tightening torque
Knock sensor: 16 - 28 Nm
(160 - 250 kg.cm, 11.8 - 18.4 lb.ft)
4. Measure the capacitance between the terminal 2 & 3.
Standard value: 800 - 1600 pF
DTC P0326 - Knock Sensor
TROUBLESHOOTING PROCEDURES:
HINT: When knock sensor signal is abnormally low.