Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
![background image](/hyundai/accent_gt_coupe/l4-1495cc_1.5l_dohc_mfi/Page-1521003.png)
If the voltage is correct, go to step 4.
If the voltage is incorrect, replace the stop lamp switch or repair the wiring. Go to step 4.
4.
Test the A/T shift lock solenoid:
Probe the red/green (R/G) wire on the backside of the connector to the A/T shift and key lock control module with a voltmeter positive lead.
Connect the negative lead to ground.Test the A/T shift lock solenoid as shown in image.
If the voltage is correct, go to step 5.
If the voltage is incorrect, replace the A/T shift lock solenoid or repair the wiring. Go to step 5.
5.
Test the park position switch:
Probe the red (R) wire on the backside of the connector to the A/T shift and key lock control module with a voltmeter positive lead. Connect the
negative lead to ground.
If the voltage is correct, go to step 6
If the voltage is incorrect, replace the park position switch or repair the wiring. Go to step 6.
6.
If the above components test within specification, replace the A/T shift and key lock control module.
PARTS INFORMATION: