hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Disassembly and Reassembly|Page 8755 > < Disassembly and Reassembly|Page 8753
Page 1
background image

Alternator: Service and Repair
Removal and Installation

REMOVAL

1. Disconnect the negative terminal from battery and disconnect the radiator fan connector and condenser fan connector.

2. Remove the radiator mounting bolts

3. Loosen the belt tension adjusting bolt and remove the mounting bolt. Then, lift the vehicle on the jack.

4. Disconnect the generator connector and remove the B+ terminal cable.

Disassembly and Reassembly|Page 8755 > < Disassembly and Reassembly|Page 8753