Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
Shift Solenoid: All Technical Service Bulletins
A/T - Shift Solenoid Incorrect Operation/MIL ON
Group:
TRANSAXLE
Number:
00-40-009
Date:
AUGUST, 2000
Model:
ALL
Subject:
AUTOMATIC TRANSAXLE SOLENOID DIAGNOSTIC TROUBLE CODES
DESCRIPTION:
Incorrect operation of the transaxle solenoids may result in the following symptoms:
^
Erratic shift
^
Transaxle held in 3rd gear Fail-Safe
^
Diagnostic Trouble Codes (see list in "DTC Information")
^
MIL illuminated
NOTE:
Do NOT replace the transaxle for solenoid codes listed as "Electrical Condition" in the "DTC Information" section of this bulletin. Instead, follow
the repair procedure shown below.
REPAIR PROCEDURE:
1.
Using a Hi-Scan Pro, select: "Hyundai Vehicle Diagnosis" menu, "Automatic Transaxle" menu and "Diagnostic Trouble Codes". Repeat the
procedure and select "Engine" menu and "Diagnostic Trouble Codes". Record the DTC and description.
NOTE:
Steps 2-5 are only for Elantra/Tiburon prior to 2001 MY and all Accents. For other models, go to Step 6:
2.
Clean the connection between the battery cables and the battery posts.
3.
Clean the connection between the negative battery cable and the transaxle case. Reinstall the cable.
NOTE:
This procedure is necessary because the solenoids ground through the transaxle case and negative battery cable.