Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
2. Check the shims for damage or deformation.
INSTALLATION
1. Install the pad clips.
2. Install the pads onto each pad clip.
NOTE: Position the pad with its pad wear sensor upward on the piston side.
3. Seat the piston in the cylinder using Special Tool (09581-11000).
4. Install the new pads. The shims are attached to the each pad as illustrated.
CAUTION: Never apply grease to the disc or pads.
5. Install the bolt and tighten to the specified value.
Tightening torque: 22 - 32 Nm (220 - 320 kg-cm, 16 - 24 ft. lbs.)