Azera V6-3.3L (2007)
Headlamp Bulb: Service and Repair
HEAD LAMPS
REPLACEMENT
BULB
1. Turn the head lamp switch off.
2. Disconnect the power connector from the lamp.
3. Remove the lamp assembly.
4. Remove the dust cover.
5. Remove the ignitor (B) after disconnecting connector (A)
6. Remove fixing spring and replace the bulb.
7. Installation is the reverse of removal.
CAUTION:
-
Turn the head lamp switch off to avoid high voltage
-
Be careful not to damage the bulb and use genuine bulbs only.
-
Do not apply excessive force and fit it correctly.
-
Confirm the bulb locking.