Azera V6-3.3L (2007)
2. Overview
^
Receives RIF data from sensor.
^
Uses sensor data to decide whether to turn on TREAD Lamp.
^
Uses sensor information, background noise levels, short circuit output status, vehicle battery level, internal receiver states to determine if there
is a system or a vehicle fault.
OPERATION
1. Type 1 learn mode
^
TPMS sensor learning via K-line diagnostic bus using TPMS Exciter.
2. Type 2 learn mode
^
Learn via LFI wand
^
Enter type 2 learn mode via K-line command.
^
Trigger each TPMS sensor in the following order FL,FR,RL,RR with the LFI wand.
^
Exit type 11 learn mode.