Elantra L4-1595cc 1.6L DOHC (1993)
Radio/Stereo: Description and Operation
AUDIO ANTI-THEFT SYSTEM
System Description (USA only)
The anti-theft system is built-in the radio unit.
NOTE: The warning tag is located on the glass.
For operation Instructions for the anti-theft system, please refer to the audio system section in the Owner's Manual. This information is not in the Service
Manual.
1. Setting system
The system is in operation once the customer has pushed the required buttons and entered the customer selected 4-digit ID number (Anti-theft
code).
2. Anti-Theft system operation
If the normal electrical power source (battery terminal or Connector) is disconnected for repair work etc, you must input the anti-theft code of
4-digit numbers into the unit by pressing six preset memory keys. When the power source is connected again.
3. Incorrect anti-theft code input cancelling system
When unit power switch is turned on, "CODE" mark will be lit on LCD, then input Anti-Theft Code by pressing preset buttons. If incorrect code is
input, press and hold BAND button until incorrect code on LCD disappears and "CODE" mark will be lit again. Then enter correct code.
Note: If incorrect code is input 3 times, it will be impossible to cancel incorrect code input and enter correct code for 1 hour.