Elantra L4-1595cc 1.6L DOHC (1993)
8. Using the special tool, remove the plug cap from the oil pump portion of front case.
9. Remove the left side cylinder block plug and insert a screwdriver with an 8 mm (0.32 in.) diameter shaft into plug hole. Screwdriver shaft must be
inserted more than 60 mm (2.4 in.)
10. Remove the oil pump driven gear and left counter balance shaft retaining bolt.
11. Remove the front case mounting bolts and remove front case assembly and gasket.
12. Remove the two counter balance shafts from the cylinder block.
