Elantra L4-1595cc 1.6L DOHC (1993)
Steering Gear: Service and Repair
Removal/Instalation
1. Raise and support vehicle.
2. Using tie rod end puller tool No. 09568-31000, or equivalent disconnect tie rod from knuckle.
3. Working from inside passenger compartment, disconnect shaft assembly from steering gear.
4. Drain power steering fluid, then disconnect hoses from steering gear.
5. Remove band from steering joint cover.
6. Remove steering gear mounting bolts, then the steering gear from left side of vehicle.
7. Reverse procedure to install.
