hyundai Workshop Repair Guides

Hyundai Elantra L4-1595cc 16L DOHC Workshop Service and Repair Manuals

All Technical Service Bulletins for Synchronizer Hub: > < M/T - 2nd to 3rd Gear Clash/Grind|Page 5825
Page 5
background image

A)

Install new spring pins using the special tool (09414-11000).

B)

When installing, make sure that the slit of the spring pin is aligned with the shift rail center line.

CAUTION:

DO NOT REUSE SPRING PINS

Complete assembly steps as shown in the applicable shop manual

All Technical Service Bulletins for Synchronizer Hub: > < M/T - 2nd to 3rd Gear Clash/Grind|Page 5825