Elantra L4-1595cc 1.6L DOHC (1993)
CORRECTION:
HMC has developed two field fix kits to improve this condition. The kits contain a larger synchronizer hub, sleeve, rings and 3rd and 4th gears. The
synchronizer capacity has also been increased. The two kits may be installed into vehicles built before or after March 1, 1993 as shown in the chart in
this bulletin.
1)
KIT NUMBERS: KIT 1: 43260-34Q10
KIT 2: 43260-34Q00
NOTE:
The field fix parts are the same as those adopted in production on the dates for the vehicles listed below:
Sonata - All 1995
Elantra - 6/8/93
Excel - 1/19/94
If a vehicle produced after the production change date has a 2nd to 3rd gear clash, do not install the whole kit. Order and install parts 1, 2, 3, 8, 9, and 10
from the list shown above.
Disassembly Instructions
Disassemble transaxle as described below:
1.
Remove the reverse idler gear and shaft.
2.
Remove the spring pins using the special tool (09414-11000)