Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
![background image](/hyundai/elantra/l4-1595cc_1.6l_dohc_16_valve/Page-1829001.png)
Trunk / Liftgate Spring: Technical Service Bulletins
Rear Spoiler - Assist Spring Mounting Hole Location
Group: BODY
Number: 95-60-005
Date: AUGUST, 1995
Model: 1995 ELANTRA "SE"
Subject:
ELANTRA REAR SPOILER ASSIST SPRING MOUNTING HOLE LOCATION
DESCRIPT1ON:
In some vehicles the upper mounting hole for the assist spring used to balance the torsion bar may have been drilled too low to allow for proper tension
of the assist spring. Inspect the spring hole location. If it is not correctly positioned, drill a 5/32 to 1/4" hole in the correct location as illustrated in the
diagram.
Note
Refer to TSB 95-60-004 for spoiler installation. For additional information see Parts Bulletin # 0911 dated 6/15/95.