Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
4. Turn the two sprockets so that their dowel pins are located on top. Then, align the timing marks facing each other with the top surface of the
cylinder head.
NOTE: The same camshaft sprocket Is used for the Intake and exhaust camshafts and is provided with two timing marks. When the sprocket is
mounted on the exhaust camshaft, Use the timing mark on the right with the dowel pin hole on top. For the intake camshaft sprocket, use the one
on the left with the dowel pin hole on top.
5. Align the crankshaft sprocket timing marks.
6. Align the oil pump sprocket timing marks.