Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Throttle Body: Service and Repair
TORQUE : Nm (kg.cm,lb.ft)
REMOVAL
CAUTION
1. The throttle valve must not be removed.
2. When loosening a phillips lips screw firmly tightened, use an exact phillips screwdriver for the screw.
INSPECTION
Cleaning Throttle Body Components
1. Clean all components. The following components must not be cleaned by immersion in cleaning solvents.
-
Throttle position sensor
-
ISO motor assembly
-
Idle position switch
The insulation of these components will be damaged if they are immersed in cleaning solvent. They should be cleaned by using a piece of
cloth.
2. Check for restriction of the vacuum port or passage. Clean the vacuum passage by using compressed air.