Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Fuel Pressure: Testing and Inspection
Fuel Pump Operation Check
1. Turn the ignition switch to the OFF position.
Connecting Jumper To Terminal
2. Apply battery voltage to the fuel pump drive connector to check that the pump operates.
NOTE
-
The fuel pump is in-tank type and Its operating sound is hard to hear without removing the fuel tank cap.
3. Pinch the hose to check that fuel pressure is felt.
Fuel Pressure Test
1. Reduce the internal pressure of the fuel pipes and hoses by the following procedures.
Fuel Pump Connector Location
-
Disconnect the fuel pump harness connector in the rear seat side.
-
Start the engine and after it stops by itself, turn the ignition switch to the OFF position.
-
Disconnect the battery negative (-) terminal.
-
Connect the fuel pump harness connector.