Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
Stabilizer Link: Service and Repair
1. Raise and support front of, vehicle, then remove wheel and tire assembly.
2. Using tie rod end puller tool No. 09568-31000, or equivalent, separate tie rod end from steering knuckle.
Fig. 12 Stabilizer Bar Replacement
3. Loosen stabilizer link bolt and nut, then disconnect stabilizer bar from lower control arm,Fig. 12.
4. Loosen stabilizer bar mounting bolts through access holes provided in body.
5. Remove stabilizer bar through access opening.
6. Reverse procedure to install.