Elantra L4-1595cc 1.6L DOHC 16 Valve (1995)
3.
Remove the clutch release lever (see figure 1).
4.
Pull up the upper plastic packing support (bushing) (see figure 1).
5.
Apply grease (multi-purpose such as wheel bearing grease or any NLGI-2 specification grease) on the inside of the packing support (bushing) and
outside of the clutch release shaft. (NLGI = National Lubrication Grease Institute)
6.
Assemble all removed components in the reverse order of removal.
WARRANTY INFORMATION