Elantra L4-2.0L (2004)
3. Remove the brake hose (A) from the suspension arm by removing the brake hose clip (B). Thoroughly clean the outside of the caliper to prevent
dust and dirt from entering inside. Support the caliper with a piece of wire so that it does not hang from the brake hose.
4. Remove the two guide rods (C) and caliper (D) from the bracket.
5. Remove the pad shim (A) and brake pads (B).
6. Using vernier calipers, measure the thickness of each brake pad lining. Measurement does not include pad backing plate (A) thickness.
