Elantra L4-2.0L (2004)
7. Installation is the reverse of removal.
NOTE:
-
Apply liquid thread lock to the upper anchor bolt before reinstallation.
-
Check that the retractor locking mechanism functions as described.
-
Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
UPPER AND LOWER ANCHOR BOLT CONSTRUCTION
SEAT BELT BUCKLE
1. Remove the front seat.
2. Remove the recline cover.
3. On a driver's seat with side airbag, disconnect and/or detach the seat belt switch connector (A) and clip and harness clips (B).