Elantra L4-2.0L (2004)
NOTE:
The Hi-Scan Pro detects the CAR MODEL and PART NO. and displays them on the Hi-Scan Pro screen.
WARNING:
If a communication error occurs during reprogramming, use the Manual Update Procedure again to reprogram the ACU. If a diagnostic code(s) is
detected during reprogramming, repair the air bag system as specified by the code and reprogram again, using the Automatic Reprogram Procedure.
NOTE:
Do not interrupt the reprogramming at any time.
7.
When the "REPROGRAMMING COMPLETED" message is displayed, turn the Hi-Scan Pro off and the process is complete.
8.
Turn the ignition key to the "OFF" position for 20 seconds and then start the engine to check for proper operation.
9.
Check for diagnostic codes using the Hi-Scan Pro with the system software card. Erase any diagnostic codes.
EXPLANATION OF ERROR MESSAGE:
1.
"INVALID PASSWORD": Please enter the correct password again.
