hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Air Door Cable, HVAC > < Air Conditioning Switch|Testing and Inspection
Page 1
background image

Air Door Actuator / Motor: Testing and Inspection

1. Connect vacuum tester to the each vacuum connectors and apply - 510 mmHg pressure.
2. Check vacuum hiss from the diaphragm of the vacuum motor and that the shaft returns smoothly to initial position. If not okay, replace the vacuum

motor.

NOTE:  Never manually operate any vacuum motor or vacuum motor controlled door. This may cause internal damage to the motor diaphragm.

Air Door Cable, HVAC > < Air Conditioning Switch|Testing and Inspection