Elantra GLS Sedan L4-2.0L (1999)
14.
Quickly feed enough rosin-core solder wire to achieve an even, moderate thickness coat of solder over the joint. Once the solder begins to flow,
the soldering process will be completed in a few seconds.
NOTE:
A good solder joint will have an even, smooth & shiny appearance. A poor solder joint (also called a cold solder joint) will have a dull appearance &
an uneven surface.
15.
Slide the heat shrink tubes over the solder joints.
16.
Using a heat gun with a heat deflector attachment, heat up the shrink wrap tubing until the tubing shrinks tightly and the sealant starts to flow out
of the end of the tubing.