Elantra GLS Sedan L4-2.0L (1999)
4.
Insert a 5 mm drill or MS (5 mm) bolt in the adjustment hole of the range switch. Check that the drill or bolt fits into the adjustment holes.
^
If not, go to Step 5
^
If so, go to step 9
5.
Loosen the two 10 mm mounting bolts.
6.
Disconnect the shift cable at the lever.
7.
Insert a 5 mm drill or M5 (5 mm) bolt in the adjustment hole of the range switch. Tighten the two 10 mm mounting bolts to specification.
Specification:
7-8 ft.lb (10-12 Nm, 100-120 kg.cm)