Elantra GLS Sedan L4-2.0L (1999)
4.
Remove the oil pan gasket from the oil pan.
5.
Use a knife or razor blade to scrape off the gasket. Use a wire brush to remove any remaining gasket material.
6.
Use a razor blade to remove any gasket material remaining on the transaxle case surface. Wipe the surface with a clean rag.
7.
Apply a thin bead of sealant on the oil pan flange approximately 1.0 mm (1/16") thick.
NOTE:
Use Hyundai Ultra-Gray Sealant, P/N 00231-13800, or equivalent.
8.
Install a new gasket on the oil pan flange and align the holes.
9.
Apply a thin bead of sealant on the new gasket approximately 1.0 mm (1/16") thick.
10.
Reinstall the oil pan to the transaxle case. Tightening torque: 10-12 Nm (100-120 kg.cm, 7 - 9 lb.ft).
