Elantra GLS Wagon L4-2.0L (2000)
11. Perform a water-leak test for the windshield.
Use a cold water spray, being careful not to direct a powerful stream of water on the new adhesive material. Allow water to spill over the edges of
the glass.
12. If there are leaks, dry the affected area, then apply sealant.
NOTE:
-
Let the car stand for at least four hours after windshield installation. If the car has to be used within the first 8 hours, it must be driven slowly.
-
Keep the windshield dry for the first hour after installation.
13. Install the removed parts
NOTE:
Advise the customer not to do the following things for two to three days:
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough, uneven roads).
