Entourage V6-3.8L (2009)
Front Door Window Regulator: Service and Repair
Replacement
Door Module Assembly Replacement
1. Remove the following parts.
A. Front door trim.
B. Glass.
C. Channel.
2. Disconnect the wiring harness (A).
3. Disconnect the lock rod (A) and outside handle rod (B).
4. Loosen the door module mounting bolts and the latch mounting screws, then remove the door module (A).
5. Installation is the reverse of removal.
NOTE:
-
Make sure the connector is plugged in properly and each rod is connected securely.
-
Make sure the door locks and opens properly.
