Entourage V6-3.8L (2009)
Parking Brake Warning Switch: Testing and Inspection
Instrument Cluster
Brake Fluid Level Warning Switch
Inspection
Brake Fluid Level Warning Switch
1. Remove the connector (A) from the switch located at the brake fluid reservoir (B).
2. Verify that continuity exists between switch terminals 1 and 2 while pressing the switch (float) down with a rod.
Parking Brake Switch
Inspection
Parking Brake Switch
The parking brake switch is a push type. It is located at the side of the parking brake pedal.
1. Check that there is continuity between the terminal and switch body with the switch (A) ON.
2. Check that there is no continuity between the terminal and switch body with the switch OFF.
If continuity is not as specified, replace the switch or inspect its ground connection.