Entourage V6-3.8L (2009)
19. Using the special tool, remove the oil seal and ball bearing from the valve body housing.
20. Remove the oil seal and O-ring from the rack housing.
CAUTION:
Be careful not to damage the pinion valve cylinder inside of the rack housing.
21. Using the special tool (09573-33100, 09555-21000),remove the oil seal (A) from the rack housing.
CAUTION:
Be careful not to damage the rack cylinder inside of the rack housing.
Reassembly
1. Apply the specified fluid to the entire surface of the rack oil seal.
Recommended fluid: PSF-3
2. Install the backup washer and oil seal (A) to the specified position in the rack housing.
3. Apply the specified fluid to the entire surface of the rack bushing oil seal.
Recommended fluid: GPSF-3
4. Install the oil seal (A) in the rack bushing (B).
5. Apply the specified fluid to the entire surface of the O-ring and install it in the rack bushing.
