hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Recall - Cruise Control Modification|Page 5302 > < Trunk / Liftgate Switch|Locations
Page 1
background image

Technical Service Bulletin # 9301005

Date: 930901

Recall - Cruise Control Modification

Group: CAMPAIGN BULLETIN
Number: 93-01-005
Date: SEPTEMBER, 1993
Model: 1986-89

EXCEL

Subject
SAFETY CAMPAIGN #003 - EXCEL CRUISE CONTROL MODIFICATION

Campaign Description

CONDITION

In laboratory tests Hyundai has been able to induce a malfunction in the microprocessor of the cruise control unit. This only occurs in vehicles equipped
with the Excel Hi-Power radio with cassette (H340). It was found that if the cruise control switch is in the "ON" position and the car's electrical system
experiences a voltage drop, the cruise control may operate erratically when placed in the "set" mode. We have also found that the movement of the cruise
control switch to the "OFF" position cancels the malfunction. Application of the brake pedal alone will not cancel the malfunction. This situation cannot
occur if the cruise control is in the "OFF" position. Therefore, the cruise control should be switched to the "OFF" position until the electronic control
module is replaced.

CORRECTION

Replacement of the electronic control module of the Genuine Hyundai Cruise Control whether or not the vehicle is equipped with the Hi-Power radio
with cassette.

VEHICLE AFFECTED 
1986 to 1989 model year Excel with a Genuine Hyundai Cruise Control.

Inspection

This procedure will help you determine if the customer's vehicle is equipped with a Genuine Hyundai Cruise Control Control system.

1.

Check the cruise control stalk on the steering column to see if it matches the one in the illustration. The Genuine Hyundai Cruise Control stalk is
mounted on the right side of the steering column, and controls wiper/washer functions as well as cruise control. If the cruise control isn't a Genuine
Hyundai Cruise Control system, inform your customer that it isn't affected by the campaign.

2.

If the stalk matches the one in the illustration, inspect the vacuum actuator, located under the instrument panel, above the brake pedal. (In this
illustration, part of the instrument panel was removed so you can see the vacuum actuator clearly. You'll have to stick your head under the
instrument panel to see this component.)

Recall - Cruise Control Modification|Page 5302 > < Trunk / Liftgate Switch|Locations