Excel L4-1468cc 1.5L SOHC (8 VALVE) (1986)
33.
Make sure the engine is at operating temperature and the curb idle speed is correct.
Manual Transaxies: 700 rpm
Automatic Transaxies: 750 rpm
34.
Connect a timing light. Loosen the distributor mounting nut and set the ignition timing to 5 BTDC.
Completing the Procedures
35.
Before closing the hood, you'll need to place a punch mark over the 1St digit on the firewall identification plate. This will show that the campaign
procedures have been completed.
36.
You will also need to apply an Authorized Modifications Label to the underside of the hood, close to the emissions label. This label will show the
new ignition timing specification. Wipe the surface clean before applying the new label.
37.
On the Authorized Modifications Label, you will need to write in the following information:
CHANGE AUTHORITY: 004
DEALER CODE: Your dealer code