Excel L4-1468cc 1.5L SOHC (8 VALVE) (1986)
20.
Make sure the choke shim cap has not moved out of position, and break off the installation handle from the shim cap.
21.
Re-install the coolant hose on the carburetor, and the high altitude compensator on the firewall clip.
Cleaning the SUB-EGR Valve
22.
Disconnect the sub-EGR valve linkage by pressing in on the retaining pin and spring, and pulling upward on the linkage.
23.
Remove the rubber boot and then remove the Sub-EGR valve.
CAUTION:
When removing the boot, be careful not to damage it.