Excel L4-1468cc 1.5L SOHC (8 VALVE) (1986)
/Page-1017001.png)
Alignment: Service and Repair
Rear Wheel Alignment
CAMBER
Camber is set at the factory and cannot be adjusted. Ensure assembly is free of worn, loose or damaged parts prior to measurement of rear wheel
alignment. Camber should be - 0°40'.
TOE-IN
Toe-In is set at the factory and cannot be adjusted. Ensure assembly is free of worn, loose or damaged parts prior to measurement of rear wheel
alignment. Toe-In should be 0 inches.
