Genesis Coupe L4-2.0L Turbo (2010)
Front Bumper Cover / Fascia: Technical Service Bulletins
Body - Front Bumper Gap Adjustment Procedure
Group BODY
Number 09-BD-009
Date AUGUST, 2009
Model 2010 GENESIS COUPE (BK)
Subject
FRONT BUMPER COVER GAP ADJUSTMENT
DESCRIPTION
This service procedure describes how to inspect and adjust the gap between the head lamp and the front bumper cover.
APPLICABLE VEHICLES
Model: GENESIS Coupe(BK)
Production date range: From September 23, 2008 to May 21, 2009
SERVICE PROCEDURE
1. Check the gap (A) between the lower edge of the head lamp and the upper edge of the front bumper cover.
NOTE:
Specified gap: 3.0 +/- 0.5mm
2. If the gap exceeds the specification, adjust the gap by following the below procedures.
NOTE:
Adjust the gap only on the affected side.
3. Open the hood.
4. Remove the radiator grill clips (8EA).