Genesis Sedan V6-3.8L (2009)
Air Bag Control Module: Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system
deployment and an event that does not. The SRSCM must decide whether to deploy the restraint system or not. After determining that pretensioners
and/or airbag deployment is required, the SRSCM must supply sufficient power to the pretensioners and airbag igniters to initiate deployment.
The SRSCM determines that an impact may require deployment of the pretensioners and airbags from data obtained from impact sensors and other
components in conjunction with a safing function.
The SRSCM will not be ready to detect a crash or to activate the restraint system devices until the signals in the SRSCM circuitry stabilize.
It is possible that the SRSCM could activate the safety restraint devices in approximately 2 seconds but is guaranteed to fully function after prove-out is
completed.
The SRSCM must perform a diagnostic routine and light a system readiness indicator at key-on. The system must perform a continuous diagnostic
routine and provide fault annunciation through a warning lamp indicator in the event of fault detection. A serial diagnostic communication interface will
be used to facilitate servicing of the restraint control system.
