Genesis Sedan V6-3.8L (2009)
![background image](/hyundai/genesis_sedan/v6-3.8l/Page-1959010.png)
29. Insert the new limit switch's pins into the connector body as shown, pin-for-pin. Insert the pins firmly, until a confirmation click' is heard and felt.
30. Lock the connector pins in place by pushing in the connector pin lock.
31. Reconnect the (2) connector halves and reinstall connector body onto the retaining bracket.
32. Remove the existing telescope limit switch by removing the (2) mounting screws holding the switch to the column.
NOTE:
A Phillips screwdriver with a minimum 14" length shank will be required to remove the rear-most screw. Access the screw as shown.