Santa Fe L4-2.4L (2001)
2. Remove the accelerator cable.
3. Remove the engine coolant hose and throttle body.
4. Remove the P.C.V. valve and brake boost vacuum hose.
5. Disconnect the vacuum hose connector.
6. Remove the injector cover.
7. Bleed off pressure in the fuel pipe line to prevent fuel from spilling and then disconnect the high pressure hose.
8. Disconnect the fuel injector harness connector.
9. Remove the delivery pipe with fuel injectors and the pressure regulator.
NOTE: When the delivery pipe is removed, do not drop the injectors.
