Santa Fe L4-2.4L (2001)
2. Remove the exhaust manifold.
3. Remove the exhaust manifold gasket.
INSPECTION
1. Check for damage or cracking.
2. Using a straight edge and feeler gauge, check for distortion on the cylinder head matching surface.
Standard value: 0.15 mm (0.006 inch)
Service limit: 0.3 mm (0.012 inch)
3. Check the exhaust manifold for damage and cracking.
INSTALLATION
1. Install the exhaust manifold with its gasket.
Tightening torque
Exhaust manifold
M8: 25 - 30 Nm (250 - 300 kg.cm, 18 - 22 ft. lbs.)
M10: 35 - 55 Nm (350 - 550 kg.cm, 25 - 40 ft. lbs.)
NOTE: Do not use the used exhaust manifold gasket.
2. Install the heat protector.
