Santa Fe L4-2.4L (2001)
TEMPERATURE CONTROL
This is used to turn the heating system on and off and 10 select the degree of heating or cooling desired.
Temperature Control Actuators
TEMPERATURE CONTROL ACTUATOR
Temperature Control Actuator
1. Temperature control actuators are installed in the heater unit case. The control switches and the vent duct switch will operate actuators to regulate
the temperature and discharge air.
2. Temp switch terminal voltage check.
MODE CONTROL ACTUATOR
1. Pressing the mode select switch with the ignition on will shift the driver side and passenger side mode door actuators as follows:
VENT -> BI/LEVEL -> FLOOR -> MIX