Santa Fe L4-2.4L (2001)
Combination Switch: Service and Repair
COMPONENTS
REMOVAL AND INSTALLATION
Prior to removing of the multifunction switch assembly in vehicles equipped with air bags, be careful to follow the following:
CAUTION:
-
Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
-
Do not drop the air bag module or clock spring or allow contact with water, grease or oil. Replace if a dent, crack, deformation or rust is detected.
-
The air bag module should be stored on a flat surface and placed so that the pad surface is lacing upward. Do not place anything on top of it.
-
Do not expose the air bag module to temperatures over 93 °C (200 °F).