Santa Fe L4-2.4L (2001)
Location: Under left side of instrument panel near fuse box.
27.
Press ENTER and the Hi-Scan Pro will establish communication and check the TCM ID.
28.
The boot program will download first, next the main program and then the interrupt vector program.
NOTE:
An error message may appear after the Boot Program is downloaded. The Hi-Scan will automatically retry the download process. It is not necessary
to do anything at this time. lithe Hi-Scan tries several times and does not download the program, go to the Manual Update Procedure on pages 11-16.
WARNING:
Do not interrupt the reprogramming at any time. The ECM and/or the TCM may be rendered inoperative if the program does not download
completely.