Santa Fe L4-2.4L (2001)
vehicle.
IMPORTANT:
DO NOT TURN THE HI-SCAN OR THE IGNITION OFF AT THIS TIME.
For vehicles with manual transaxles, the process is complete; turn the Hi-Scan and ignition OFF. Start the engine to check for proper operation.
13.
Connect the WHITE 10-pin connector to the Hi-Scan Reprogramming Adapter and then into the white connector near the Data Link Connector
(DLC).
14.
Press ENTER and the Hi-Scan Pro will establish communication and check the TCM ID.
15.
The boot program will download first, next the main program and then the interrupt vector program.
NOTE:
An error message may appear after the Boot Program is downloaded. The Hi-Scan will automatically retry the download process. It is not necessary
to do anything at this time.
WARNING:
Do not interrupt the reprogramming at any time. The ECM and/or the TCM may be rendered inoperative it the program does not download
completely.