Santa Fe L4-2.4L (2001)
2. REMOVAL OF JOURNAL BEARINGS
Remove the journal bearings from the yoke with a special tool.
CAUTION Do not tap the journal bearings to remove them, because this will cause unbalance of the propeller shaft.
3. REMOVAL OF D.O.J. ASSEMBLY INSTALLATION BOLTS
a. Place matchmarks on the companion flange and D.O.J. assembly.
b. Remove the D.O.J. installation bolts and separate the D.O.J. assembly from the companion flange.
4. REMOVAL OF SELF-LOCKING NUT/COMPANION FLANGE
a. Place matchmarks on the companion flange and the rear propeller shaft.
b. Remove the companion flange from the rear propeller shaft.
5. REMOVAL OF CENTER BEARING ASSEMBLY
a. Remove the center bearing bracket.
b. Pull out the center bearing with a puller.
6. REMOVAL OF D.O.J. ASSEMBLY
a. Remove the D.O.J. boot from the D.O.J. assembly
