Santa Fe V6-3.5L (2004)
Brake Pedal Assy: Service and Repair
BRAKE PEDAL
REMOVAL
1. Remove the lower crash pad assembly.
2. Remove the stop lamp switch connector and disconnect the shift lock cable (Vehicle equipped with cruise control system only).
3. Remove the cotter pin and clevis pin.
4. Remove the brake pedal member assembly mounting nut.
5. Remove the brake pedal assembly.
INSPECTION
1. Check the bushing for wear.
2. Check the brake pedal for bending or twisting.
3. Check the brake pedal return spring for damage.
4. Check all parts for crack and wear.
INSTALLATION
Installation is the reverse of removal.